close

How to Copy From Another Drawing in Autocad TUTORIAL

Updated with AutoCAD 2017

Copying objects from one drawing to some other is a mutual task. You can use the Windows Clipboard and the drag-and-drib methods.

When working with two drawings open, choose View tab> Windows panel> Tile Vertically (or Horizontally) to view both drawings at the same time.

Annotation 1 : You tin can apply these techniques inside a cartoon as well, just the COPY command provides more options and accuracy.

Note 2: You may need to articulate your clipboard if having problem pasting latest copied object. (Correct click on Desktop – Brandish setting – Clipboard)

Utilize the Windows Clipboard to copy objects between drawings

Most people know that they can copy objects in a cartoon to the Windows Clipboard and and then paste those objects in another drawing. But there are a couple of tricks to this process that tin brand your work get more chop-chop and provide more than accurate results.

Of course, you can use the common Windows keyboard shortcuts:

  • Ctrl+C to copy
  • Ctrl+5 to paste

When you use the simple copy-and-paste procedure, you don't accept much control over the placement of your object in the second drawing. That's because this procedure uses the lower-left corner of the extents of the object as the base point, which may non exist useful. For example, here y'all encounter this procedure with a circle.

Every bit you tin see, the base point isn't on the circumvolve, making information technology difficult to identify the circumvolve accurately.

Therefore, AutoCAD provides you with 2 special tools for copying and pasting.

The start is Copy with Basepoint. Follow these steps:

  • Hover the cursor over the object and right-click to display the shortcut menu. For multiple objects, select them kickoff, and then right-click.

  • Choose (Clipboard,) Copy with Base Bespeak. This is the COPYBASE command. As you can meet in the figure, you can also press Ctrl+Shift+C.
  • At the Specify base indicate: prompt, use an object snap to specify the base point.
  • Click in the other drawing.
  • Paste, using Ctrl+5, or past clicking Paste on the Standard toolbar. You can as well right-click and cull (Clipboard,) Paste from the shortcut menu.
  • Your cursor is now at the base point you lot specified, and then you can accurately place the object. Specify the insertion bespeak you want.

Here, the base point was set to the center of the circle.

## Dynamic block is another great productivity tip to master. Sign up below to get your Complimentary tutorial on creating a complete dynamic block, including a drawing to do on. You'll brand a movable chair, resizable desk-bound, and more.

The 2nd useful tool is Paste to Original Coordinates. If you have two drawings that are very similar, you can use this feature to place the object at the aforementioned coordinates as in the original drawing.

Just copy the object(s) to the Clipboard, and activate the 2nd drawing. So right-click and cull (Clipboard,) Paste to Original Coordinates.

If those coordinates are not in the current brandish, practise a Zoom Extents to encounter the pasted object.

Note: We receive few comments that "Paste to Original Coordinates" may not piece of work on Mac figurer. Ane of our followers (Thanks @Chilli ) provided the following work effectually.

If you do not have the Clipboard menu option of 'pasting to original coordinates', simply follow these steps.

i. Select elements in the proposed belongings drawing.
2. Right click – clipboard>Copy with base point
3. Blazon in 0,0
4. Switch to destination cartoon
5. Right-click on open up area>clipboard>paste with base point
half dozen. Type in 0,0

And if the coordinate arrangement is the same in both drawings, your elements should exist located correctly.

Use drag-and-drop to re-create objects between drawings

Drag-and-drop doesn't give yous the same control over placement, but it's a quick way to copy objects. Note that AutoCAD automatically copies objects from drawing to cartoon, then that you don't demand to press Ctrl every bit you drag.

To re-create, select the object or objects. Then click the object and hold downward the mouse button until you see the elevate-and-drib cursor. The but gotcha is that you demand to make sure that you don't click on a grip, considering that will simply make the grip hot.

Then drag the cursor to the other drawing and release the mouse button to place the object. You'll probably need to accommodate the placement, using the MOVE command, or past using grip-editing.

Want more productivity tips like this? You can draw and edit faster and easier with this easy to follow top 25 productivity tips every AutoCAD user should know.

  • Author
  • Recent Posts

Ellen Finkelstein

DOWNLOAD HERE

How to Copy From Another Drawing in Autocad TUTORIAL

Posted by: catherineguall1992.blogspot.com

Comments

Post a Comment